Aluminum nose wire

The aluminum wire is widely used. The aluminum nose wire on the mask is made of aluminum wire, and the alloy used for the aluminum nose wire is usually 3003 alloy, 1060 alloy.
3003 aluminum wire is al Mn alloy, which is the most widely used antirust aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum), and it can not be strengthened by heat treatment. Therefore, cold working method is adopted to improve its mechanical properties: it has high plasticity in annealing state, good plasticity in semi cold work hardening, low plasticity in cold work hardening, good corrosion resistance, good weldability, and poor machinability Liang. 1060 Aluminum Wire is industrial pure aluminum, the aluminum content (mass fraction) is 99.60%, which can not be strengthened by heat treatment. The surface of pure aluminum is silvery white, and its density decreases with the increase of purity or temperature. The 1060 Aluminum plate production process is relatively simple, the technology is relatively mature, and the price is much cheaper than other high-grade alloy aluminum plates. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, stretching) with high formability. 1060 Aluminum Wire has high plasticity, corrosion resistance, conductivity and thermal conductivity, but its strength is low, and its machinability can not be enhanced by heat treatment; it can be welded by gas welding, hydrogen atom welding and contact welding, and it is not easy to be brazed; it is easy to bear all kinds of pressure processing, drawing and bending. Because 1060 Aluminum Wire and 3003 aluminum wire have plasticity and other characteristics, they are used as the preferred alloy for the aluminum nose wire.



Henan signi Aluminum Co., Ltd. is a professional manufacturer of aluminum nose wire. The aluminum wires we produce are usually in o state, with thickness of 0.4mm, 0.45mm, 0.50mm and width of 95mm. We can also customize aluminum nose wires on different surfaces according to the needs of customers, such as mill finish, or coated with 3M adhesive, etc.