5052-H32 aluminum coil

5052 aluminum coil belongs to Al Mg alloy, which has a wide range of applications and is a promising aluminum alloy. Good corrosion resistance, excellent weldability, good cold workability and medium strength. 5052 alloy aluminum coil has high strength, especially high fatigue strength, high plasticity and corrosion resistance, good weldability, poor machinability and polishing.
5052-H32 aluminum coil is used for parts requiring good formability and corrosion resistance, high fatigue strength, good weldability and medium static load. It can not be strengthened by heat treatment. The chemical composition of the alloy is similar to that of 5A02 alloy, and its properties are basically the same as that of 5A02. The alloy has high plasticity and low strength, and its corrosion resistance and weldability are good. The machinability of the alloy in annealed state is not good.
Performance advantages of 5052-H32 aluminum coil produced by Henan Chalco:
A: The main alloy element is magnesium, which has good corrosion resistance, excellent weldability, good cold workability and medium strength.
B: The plasticity is good in semi cold work hardening, low in cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing.
C: It is used for low load parts that require high plasticity and good weldability and work in liquid or gas medium, such as fuel tank, oil pipe, and sheet metal parts of traffic vehicles and ships.
5052-H32 aluminum coil has moderate tensile strength and meets the lightweight requirements of 3C products. After anodizing, there is no black line, material grain, moderate brightness, meets the requirements of high-end surface quality, moderate hardness, short production process and good stamping effect, and meets the requirements of efficient output of consumer electronics products.